Printa II Doppler Printer by Huntleigh priced right and ready to ship today and yes, the Printa II Doppler Printer is in stock. The Dopplex Printa II Doppler Printer system comprises three main components, the printer, the AC mains adapter and the interface buffer box (IBB), which are all included with your purchase. You also get a rechargeable battery to. Charge the Printa II battery for 10 hours before using and you are on your way. When connected to the MD2 the Printa II Doppler Printer with a vascular probe connected, the Printa II Doppler Printer can be used to record bloodflow waveforms. Initiaing the printer is as easy as pressing and releasing the Start/Stop button. Four seconds of bi-directional waveforms will be captured and stored in the IBB and then printed. Up to 12 waveforms can be saved in the IBB while printing proceeds.

The Printa II Doppler Printer may also be used as a Fetal Doppler Printer when using a obsteteric probe. Doppler Models FD2 and MD2 may be used with the Printa II. When connected to the MD2 or FD2 Doppler with an obsterteric probe the unit can used to produce standard format FHR traces in real time. When the Start button is pressed, a header section is automatically printed at the start of each trace to allow patient information to be inserted, and the trace is automatically annotated with chart scales. probe freequency and markers. When connected to the Printa II Doppler Printer, The Mode Button on the doppler unit operates as an event marker, producing an event mark on the printout above the FHR trace each time the button is pressed.

The Printa II Doppler Printer is easy to use and comes with a detailed instructional booklet. Charge the rechargeable battery to a full charge and you can be using the Printa II Doppler Printer immediately.